COMP Cams · New
COMP Cams Pushrod10.000in Straight 7/16
MPN 8653-16 · Store SKU cca8653-16
Supplier stock checked 11/7/2026, 1:31:45 PM UTC. Adding a part does not reserve it.
Request a return within 30 calendar days after delivery. New parts must be unopened and unused.
Shipping & returns ↗This policy does not limit rights required by law.Free standard shipping on eligible parts orders of $100 or more. Oversized and freight items excluded. Fitment, taxes, availability and final totals are confirmed before payment.
Product details
radius, 5/16" ball end. The radii on each end provide additional clearance for the Rocker adjuster at high lift and allow the pushrods to be installed either "up" or "down". The pushrods have a consistent .165" wall thickness, even in the tapered ends, which is thicker, stiffer and stronger than common .080" or .125" wall designs. These pushrods are made in the USA from heat-treated, one-piece chromemoly tubing, which is much stronger than typical 1000 Series Steels and will better handle extreme valve train setups.Full Set of (16) 10.000" Pushrods7/16" diameter offers additional stiffness and higher natural frequency 210˚ COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure. The additional stiffness and higher natural frequency of a 7/16" diameter Pushrod is a significant advantage in any application that has ample intake port and lifter clearance. The main bodies of these pushrods feature a straight 7/16" OD that tapers down to a 210˚ Where pushrods experience impact loads of up to 7500 lbs.Made in the USA from one-piece, heat-treated, one-piece chromemoly tubing, making them stronger than typical 1000 Series Steels and will handle extreme valve train setups. For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 10.000" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod. radius, 5/16" ball ends provide additional clearance for the Rocker adjuster at high liftConsistent .165" wall, even in the tapered ends Stiffer and stronger than common .080" or .125"Originally developed for NASCAR and NHRA Straight 10.000" Long, .165" Wall, 7/16" Diameter Pushrod Set
Manufacturer fitment & guides
Check 8653-16 against the manufacturer’s application information below.
Part-specific notes
- California Proposition 65: Y
